Corsair Force GT SSD driver for Windows 7 - Corsair drivers for Windows 7

Corsair Force GT SSD 1.3.2

Download Other drivers drivers from Corsair for Windows 7

Corsair Force GT SSD driver from Corsair for Windows 7 / Windows 7 x64

Publisher review for Corsair Force GT SSD 1.3.2:

Before install Corsair Force GT SSD 1.3.2you should set a system restore point, to make sure you can rollback to your original driver in case you accidentally install another driver or select the driver for another version of the operating system.

Also, do not forget to check with our site as often as possible for new version of Corsair Force GT SSD . We recommend to always use most recent version of a driver.

IMPORTANT NOTES BEFORE BEGINNING YOUR UPDATE

If you are stable and do not have issues, we suggest that you do not flash your firmware.

This update is intended to not be destructive. However, we strongly urge that you back up any important data before beginning this procedure.

This update has been validated for use with Windows 7. It has not been validated with Windows Vista and Windows XP however it may work with these OS's. Users are encouraged to update the drives with Windows 7 when possible.

This update tool is intended to be run with the drive controller in AHCI mode. If your drive controller is not AHCI enabled and your update fails, you will need to change it to AHCI mode and also enable AHCI in your OS registry. Here is page with a guide for ENABLING AHCI.

If you have issues updating using the Microsoft AHCI driver, you may need to update using the latest driver from your drive controller manufacturer.

Our latest testing shows that this update will not work using a Marvell controller.

If your update fails using the Marvell controller, you will need to update using the chipset based drive controller on your motherboard. This applies to SATA2 and SATA3 controllers.

DO NOT at any time power off your system during this procedure.
This may
Operating system:
Windows 7 / Windows 7 x64